Low impedance exponential speaker
FONESTAR presents the VULKAN range of horn loudspeakers to provide a solution for a wide range of installations where it is required to send the sound signal with maximum efficiency.
The horn loudspeakers of the VULKAN series are suitable for reproducing the frequency range of speech and sending messages over long distances.
Specially constructed with materials that are highly resistant to adverse weather conditions, and a design that gives them an IP-66 degree of protection against the ingress of dust and water. Suitable for outdoor use and marine environments.
Low impedance loudspeaker for direct connection to the amplifier in installations where a long cable run is not necessary.
The ABS-made diffuser and the aluminium mount offer high resistance to aggressive environments.
For public address applications in open spaces, industrial facilities, sports facilities, car parks, etc.
FONESTAR presents the VULKAN range of horn loudspeakers to provide a solution for a wide range of installations where it is required to send the sound signal with maximum efficiency.
The horn loudspeakers of the VULKAN series are suitable for reproducing the frequency range of speech and sending messages over long distances.
Specially constructed with materials that are highly resistant to adverse weather conditions, and a design that gives them an IP-66 degree of protection against the ingress of dust and water. Suitable for outdoor use and marine environments.
Low impedance loudspeaker for direct connection to the amplifier in installations where a long cable run is not necessary.
The ABS-made diffuser and the aluminium mount offer high resistance to aggressive environments.
For public address applications in open spaces, industrial facilities, sports facilities, car parks, etc.
| FEATURES: | Low impedance horn loudspeaker. Prepared for outdoor use with anti-corrosion materials. Protection against water. For long-range message playback. |
| POWER: | 50 W RMS |
| LOUDSPEAKERS: | 1 x compression driver |
| RESPONSE: | 270-6,000 Hz (-10 dB) |
| IMPEDANCE: | 8 Ω |
| SENSITIVITY: | 105 dB @ 1 W/1 m |
| MAXIMUN SOUND PRESSURE: | 122 dB @ at maximum power/1 m |
| DISPERSION: | H/V: 180º/160º@500Hz, 140º/120º@1kHz, 90º/80º@2kHz, 50º/40º@4kHz (-6 dB) |
| PROTECTIONS: | IP-66 in compliance with EN 60529 |
| MATERIAL: | ABS diffuser and rear cover Aluminium mount A2 stainless steel screws |
| CONNECTION: | 30 cm cable with stripped ends |
| TEMPERATURE RANGE: | Operation: -25ºC ~ +55ºC Storage: -40ºC ~ +70ºC |
| HUMIDITY: | <95% |
| COLOUR: | Grey (RAL 7035) |
| DIMENSIONS: | 400 x 235 x 320 mm depth |
| WEIGHT: | 2.2 kg |
Technical Documentation |
Nombre | Formato | Idioma |
|---|---|---|---|
|
- |
- |
|
|
DWG |
- |
|
|
|
DXF |
- |
|
|
|
|
- |
Manuals |
Nombre | Formato | Idioma |
|---|---|---|---|
|
|
ES · EN · FR · PT |
Certificates |
Nombre | Formato | Idioma |
|---|---|---|---|
|
|
ES · EN · FR · PT |
Pictures |
Nombre | Formato | Idioma |
|---|---|---|---|
|
ZIP |
- |
|
|
|
ZIP |
- |
Do you need technical assistance?
Contact us and we will reply as soon as possible
Do you need assistance?
We believe that simple solutions are the best approach to complex problems and that each project requires its own plan. If you need assistance, fill in the form below and we will contact you.
RESOURCE CENTER
SHARE IT BY