Manufactured in reinforced plywood. 12" loudspeaker. High power deep bass, bass reflex reinforcement system.
Mono/stereo input and output for active satellites.
Compressor, limiter, phase inverter and earth disconnection. 600 W maximum, 300 W RMS
CHARACTERISTICS: | Autoamplified subwoofer in reinforced plywood. Textured paint finish. Stereo/mono input and filtered stereo output for active satellite loudspeakers. Front steel grille. Carrying handles. Top hole for 35 mm tube. Floor supports. |
AMPLIFIER: | 600 W maximum, 300 W RMS |
PROTECTION: | Compressor/limiter Forced ventilation |
LOUDSPEAKERS: | 1 x 12" woofer: 63.5 mm coil with ventilation |
RESPONSE: | 47-125 Hz |
SENSITIVITY: | 96 dB at 1 W/1 m |
SOUND PRESSURE: | 123 dB at maximum power at 1m |
INPUTS: | 1 balanced mono/stereo line, combo (XLR and 6.3 mm jack) and 15,000 Ω 775 mV XLR |
OUTPUTS: | 1 balanced stereo line, direct output, 2 x 600 Ω XLR 1 unbalanced stereo line, 100 Hz filtered output for active satellites, 2 x XLR, 600 Ω |
INDICATORS: | In use on the front, power and signal/compression on the rear panel |
CROSSOVER : | Subwoofer: active, 125 Hz crossover frequency, 24 dB/oct Output: 80 Hz high-pass filter, selectable |
CONTROLS: | Volume, phase inversion, bypass or high-pass filter and GND lift earth disconnection |
COLOUR: | Black |
POWER SUPPLY: | 230/115 V AC, 350 W |
DIMENSIONS: | 530 x 385 x 480 mm depth |
WEIGHT: | 19.3 kg |
OPTIONAL: | RS-560: Mount for placing a loudspeaker on the subwoofer |
Do you need technical assistance?
Contact us and we will reply as soon as possibleDo you need assistance?
We believe that simple solutions are the best approach to complex problems and that each project requires its own plan. If you need assistance, fill in the form below and we will contact you.

SHARE IT BY