Alarma por voz EN 54 Compacto ABT-XCTRLINE-44
4-line speaker and 4 audio signals control card
View specificationsThe SEVEN system can be scaled up to 254 devices connected via TCP/IP data network. Allows the system to be scaled up with control units, paging and firefighter microphones. Each device can operate as an independent node, interconnected by the data network. Live announcements and background music can be transmitted via the data network up to a maximum of 45 audio signals. Connection with Cat5 cable.
Each system is equipped with a control unit with two Class D amplifiers distributing 100 V line signal to 8 AB zones with 16 loudspeaker lines. The two amplifiers can be operated simultaneously by limiting the power to 320 W or as one main and one backup amplifier, to ensure operation at all times for emergency priority signals. It has monitoring and signalling of system faults and loudspeaker lines. It also has a firefighter's microphone, touch screen control, DSP, buttons and programmable GPI/O inputs and outputs, programmer, 2 simultaneous messages with expandable memory, etc.
The systems integrate a power supply with backup function in case of power loss, in compliance with EN 54-4 standard. Includes a charger with space for mounting batteries.
The system features all the elements of a voice alarm system in an IP30 protected enclosure. SEVEN is designed for easy installation and commissioning.
Due to its distributed architecture, the SEVEN system can cover all types of projects and installations, train stations, airports, hotels, shopping centres, stadiums, industrial installations, etc.
FEATURES: | 4 independent loudspeaker line outputs (A, B, C, D). The board allows switching between the main and backup amplifiers. It is installed in the available slots of the SMART-CU-11LCD, SMART-CU-11LT or SMART-CU-8LCD control units. Loudspeaker line measurement: Impedance, Loop or End of Line (EOL) Module. Detection of opening and ground leakage faults. |
Power supply: | Internal shape of the backplane of the control unit |
Connector type: | PHOENIX type 10-pin screw terminal, 5.08 mm |
Impedance measurement frequency: | 1 kHz at 48 kHz |
Signal frequency for EOL modules: | 18 kHz at 24 kHz |
Dimensions: | 70 x 215 x 30 (mm) |
Maximum measured current: | 20 A |
Do you need technical assistance?
Contact us and we will reply as soon as possibleDo you need assistance?
We believe that simple solutions are the best approach to complex problems and that each project requires its own plan. If you need assistance, fill in the form below and we will contact you.
SHARE IT BY