Increases the transmission distance of HDMI 1080p signals up to 70 m using Cat 6 cable.
Essential for carrying the HDMI signal over a greater distance than that supported by HDMI cables, which do not support distances greater than 15 m at best.
Using Cat 6 cables makes installation cheaper and saves time. It facilitates the passage of the cable through pipes and walls, reducing the difficulty and time required for installation.
It also carries the remote control signal from the TV receiver to the transmitter to control the receiver or player.
For installations where the receiver or player is away from the TV or projector, such as: exhibitions, shop windows, training rooms, conference rooms, sports centres, bars, restaurants, etc.
FEATURES: | 1.3 HDMI extension through Cat 6 cable. Resolution 1080p@60Hz and below. Bandwidth 4.95 Gbps. HDR compatible. Supports EDID Transmission distance up to 70m for 1080p@60Hz resolutions with Cat 6 cable. Remote control return transmission function 20 - 60 kHz Auto-tuning and re-connection function. ESD, overvoltage and lightning protection (IEC 61000-4-2, 1a Contact discharge level 4 (8 kV) and 1b Air discharge level 4 (15 kV). |
HDMI: | 1.3 |
HDCP: | 1.4 |
DELAY: | 0 ms |
POWER SUPPLY: | Transmitter and receiver: 5 V DC, 500 mA with adapters included |
MEASUREMENTS: | Transmitter and receiver: 72 x 25 x 67 mm depth |
WEIGHT: | 0.16 kg |
ACCESSORIES: | Remote Control IR Transmitter and Receiver |
NOTE: | It is recommended to use good quality Cat 6 cables with FTP/SFTP shielding. Cables should have shielded connectors with the cable shield connected to the connector shield, thus improving the reliability of HDMI extenders, avoiding ground loops caused by interconnecting devices (player/receiver and TV) with different ground reference which may cause loss or cutting of the picture. |
SHARE IT BY