HDMI extender over Cat 5e/6 cable



HDMI extender over Cat 5e/6 cable. Increases the transmission distance of HDMI signals up to 50 m for a resolution of 1080p, via Cat 5e/6 cable reducing the cost and making it easier to pass the cable through tubes and walls.
Consulta FonestarContact Us


HDMI extender over Cat 5e/6 cable.
HDMI loop output in transmitter for local TV.
Transmission distance of up to 50 m for a resolution of 1080p with Cat 5e/6 cable.
In accordance with IEEE-568B regulations.
Compatible with HDMI 1080p.
Bandwidth 4.95 Gbps.
EDID function: copies the EDID information from the receiver or the loop output.
Equalization depending on the length of Cat 5e/6 cable used.
Receiver powered by PoC via Cat 5e/6 cable.
Ultraslim design 18 mm height.
Remote control extender.


Transmitter: 5 V DC, 1 A with adapter included
Receiver: PoE


Transmitter and receiver: 79 x 18 x 68  mm depth


2 x 0.1 kg


Remote control receiver and transmitter


It is recommended that good quality Cat 5e/6 cables with FTP/SFTP shielding are used. The cables must have shielded connectors with the cable shielding connected to the connector shielding.
This improves the reliablity of the HDMI extenders, avoiding ground loops produced by interconnecting devices (player/receiver and TV) with different ground reference which could cause losses or image cutting.

The manual may not match its version, if so, contact us consultas@fonestar.es

× ¡Aviso! Se ha superado el numero de productos permitidos para la comparación.