ABT-xCtrLine-2 provides 2 independent loudspeaker line outputs (A, B). The board allows switching between the main and backup amplifiers.
It is installed in the available slots of the SMART-CU-11LCD, SMART-CU-11LT or SMART-CU-8LCD control units.
Line measurement methods can be performed by: Impedance, Loop or End of Line (EOL) Module. The measurement method is selected from the software configuration.
The ABT-xCtrLine-4 enables the detection of open and ground leakage faults.
| FEATURES: | 2 independent speaker line outputs (A, B). The board allows switching between the main and backup amplifiers. It is installed in the available slots of the SMART-CU-11LCD, SMART-CU-11LT or SMART-CU-8LCD control units. Loudspeaker line measurement: Impedance, Loop or End of Line (EOL) Module. Detection of opening and ground leakage faults. |
| Power consumption: | 121 mA for 48 V |
| Connector type: | PHOENIX type 6-pin screw terminal, 5.08 mm |
| Operating temperature: | 0°C to 60°C |
| Operating humidity: | 15% to 80% |
| Dimensions: | 70 x 215 x 30 (mm) |
| Accuracy of measurements: | Up to 5% |
Technical Documentation |
Nombre | Formato | Idioma |
|---|---|---|---|
|
- |
- |
|
|
DWG |
- |
|
|
|
DXF |
- |
|
|
|
|
- |
Pictures |
Nombre | Formato | Idioma |
|---|---|---|---|
|
ZIP |
- |
|
|
|
ZIP |
- |
Do you need technical assistance?
Contact us and we will reply as soon as possible
Do you need assistance?
We believe that simple solutions are the best approach to complex problems and that each project requires its own plan. If you need assistance, fill in the form below and we will contact you.
RESOURCE CENTER
SHARE IT BY