Induction Loop Amplifier for T Mode Hearing Aids
Loop amplifier system for fitting a counter to users with hearing aids. The loop amplifier provides a signal to be received by hearing aids with tele-coil (T-coil) function. It provides the hearing aid user with a clear signal, without background noise.
Improves communication by conveying the message clearly. Reducing the effort to communicate.
Ideal for noisy places where the audio amplification of hearing instruments does not provide good results due to background noise. However, with the tele-coil function a noise-free signal is obtained.
Easy installation and low maintenance.
The amplifier can cover a larger area by adapting the loop dimensions, up to approx. 20 m².
Perfect for use at ticket counters, banks, cash registers, checkpoints, motorway access points, car parks, etc.
Loop amplifier system for fitting a counter to users with hearing aids. The loop amplifier provides a signal to be received by hearing aids with tele-coil (T-coil) function. It provides the hearing aid user with a clear signal, without background noise.
Improves communication by conveying the message clearly. Reducing the effort to communicate.
Ideal for noisy places where the audio amplification of hearing instruments does not provide good results due to background noise. However, with the tele-coil function a noise-free signal is obtained.
Easy installation and low maintenance.
The amplifier can cover a larger area by adapting the loop dimensions, up to approx. 20 m².
Perfect for use at ticket counters, banks, cash registers, checkpoints, motorway access points, car parks, etc.
| FEATURES: | Tele-coil hearing aid loop amplifier. Complete kit for installation on counter and or teller window. |
| FUNCTIONS: | 1.2 m² counter loop Extendable up to 20 m² (using a 4.5 x 4.5 m loop in 4 loops) LED operation indicators. Countertop or under-counter installation. |
| POWER: | 5 W RMS, THD 2.5% |
| FREQUENCY RESPONSE: | 35 – 20k Hz, -10 dBA |
| DISTORSION: | THD+N <0.2%, 1 kHz, 1W |
| PROTECTIONS: | Overheating and overloading |
| CONTROLS: | On/off Microphone and AUX volume Output volume |
| INPUTS: | 1 clip-on microphone, 3.5 mm TS jack, 1.5 mV, Phantom 5 V 1 mA 1 AUX, 3.5 mm TRS jack, 250 mV |
| OUTPUTS: | 1 Loop, Euroblock |
| LOOP: | Loop for counter 1.2 m² included. For loop extension use recommended cable 0.22 - 1.5 mm², maximum length 70 m, impedance 0.5 - 3 Ohm |
| CURRENT: | 2 A |
| POWER SUPPLY: | 12 V DC, 1 A with adapter included Power consumption: 10 W Standby power consumption: 0.5 W |
| DIMENSIONS: | Amplifier: 155 x 35 x 75 mm depth Clip-on microphone cable: 1.40 m 70 x 70 cm loop cable (1.2 m² coverage) with 1.8 m extension cable |
| WEIGHT: | 0.3 kg |
| ACCESSORIES: | Unidirectional clip-on microphone Loop cable Adhesive T |
| CERTIFICATION: | CE marked For compliance with EN IEC 60118-4:2015-A1:2018 (Electroacoustics. Hearing aids. Part 4: Induction loop systems for hearing aids - System performance requirements) |
Technical Documentation |
Name | Format | Language |
|---|---|---|---|
|
- |
- |
|
|
DWG |
- |
|
|
|
DXF |
- |
|
|
|
|
- |
|
|
|
- |
Manuals |
Name | Format | Language |
|---|---|---|---|
|
|
ES · EN · FR · PT |
Certificates |
Name | Format | Language |
|---|---|---|---|
|
|
ES · EN · FR · PT |
Pictures |
Name | Format | Language |
|---|---|---|---|
|
ZIP |
- |
|
|
|
ZIP |
- |
SHARE IT BY