NOTICIAS FONESTAR

Don’t be tied down! New bluetooth transmitters and receivers

Don’t be tied down!

New bluetooth transmitters and receivers

Don’t be tied down! New bluetooth transmitters and receivers

BTX-3011 bluetooth transmitter

With the new BTX-3011 bluetooth transmitter, you’ll be able to turn any device with an audio jack output into a bluetooth transmitter device.

With bluetooth headphones, you’ll finally be able to listen to the audio from your PC or TV, watch your favourite films or play your favourite games without worrying about external noise.

NOTICIAS FONESTAR

BRX-3033 bluetooth receiver

 

With the new BRX-3033 bluetooth receiver, you’ll be able to transform a classic stereo into a modern bluetooth playback system. All you have to do is connect it to the aux input on the audio device.

Play all the music on your smartphone, tablet or PC through your old stereo.

BTX-3011

NOTICIAS FONESTAR
Características

BRX-3033

NOTICIAS FONESTAR
Características

Más de Fonestar

15 thoughts on “Don’t be tied down! New bluetooth transmitters and receivers

    1. It seems to us very strange that your devices are not able to pair correctly. Please find attached the user manual and the following steps in order to make it work:

      Please take into account that the Bluetooth transmitter needs 5 V DC power through the USB port. After it is powered, BTX-3011 led flashes in red and blue while it is trying to pair. During this moment, you have to put the headphones into pairing mode too. When they are paired, BTX-3011 led change to blue colour only.
      Please repeat the pairing process following our indications.
      If you have any further questions please do not hesitate to contact us.

    1. Hi,
      Regarding your question, please follow these steps in order to connect BTX-3011 and BRX-3033 with your laptop:
      Plug the BTX-3011 into your laptop using the jack 3.5 (TRS) connector for audio and USB connector for powering it.
      Plug the BRX-3033 into your loudspeakers/headphones using the 3.5 mm (TRS) connector. Please make sure that BRX-3033 is fully charged.
      Press and hold for 6 seconds BRX-3033 button. It will be lighting up red and blue.
      Press and hold for 5 seconds BTX-3011 button. It will be lighting up red and blue.
      Please keep both devices close during the pairing process.
      After some seconds, they will be paired between them. They will light up in blue during 1 second and then, every 5 seconds in purple. As a result, the audio from the laptop will be send to your loudspeakers/headphones.
      If you have any further question please do not hesitate to contact us.
      Kind regards,

  1. I’m having trouble with the btx-3011, while it does connect correctly it produces humming noise. I tried to disconnect and connect it again but still it produces humming noise/sound.
    Thanks for the feedback.

    1. Hi,
      Which device are you connecting to BTX-3011?
      Humming noise may be due to 5 V DC USB power and in this case, it will be accceptable and inevitable for this kind of devices.
      Kind regards

  2. Connection is good but I have problem, it has humming noise with it. I tried to disconnect and reconnect but still the humming persist. Hope for your feedback.

    1. Hi,
      Which device are you connecting to BTX-3011?
      Humming noise may be due to 5 V DC USB power and in this case, it will be accceptable and inevitable for this kind of devices.
      Kind regards

  3. Hi, how do you keep the BTX-3011 and the headphone paired? I have to do the pairing every time I use it or they will not connect!

    1. Hi,
      Thanks for your enquiry. The re-pairing shall be done automatically. Sometimes, it depends on the headphones and in its bluetooth chip, it is no fully compatible with all of its functions. We highly recommend you our other model BTX-3014. We have already checked that it is compatible with more headphones models.
      Kind regards

  4. Hello,
    – I’ve the Brx-3033 model;
    – I’m using the 3.5mm jack to plug it into my vehicle’s AUX connector;
    – I’m pairing the Brx-3033 with my iPhone 8;
    – Everything works with the exception of a constant white noise (similar to interference) always in background when reproducing music from my iPhone (e.g., from Spotify).
    – If I stop the music the noise persists for some time (3-5 seconds) and then disappears.
    – If I play music again, the noise returns.
    – the Brx-3033 is fully charged and NOT connected to any power supply.

    I’m wondering if you could shed some light on the issue.
    Thanks for the support.

    1. Please, check BRX-3033 with other domestic amplifier or audio system to verify if the noise still or not.
      If you can also hear the noise with the domestic audio system, maybe BRX-3033 has some issue and needs to be repaired.

Leave a Reply

Your email address will not be published. Required fields are marked *

5 × five =